Blog Archives - Wisson Robotics Pneumatic bionic muscles deliver flexible 360 degree motion, 15 kg payloads, and all-weather performance. Wed, 12 Aug 2026 01:00:00 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.2 https://wisson.sytech.site/wp-content/uploads/2026/09/wisson-ico-1-150x150.png Blog Archives - Wisson Robotics 32 32 Orion AP3-P3 pairs with DJI’s M400 for high-altitude cleaning https://wisson.sytech.site/orion-ap3-p3-m400/ Wed, 12 Aug 2026 01:00:00 +0000 https://wisson.sytech.site/orion-ap3-p3-m400/ The tethered cleaning head now flies on DJI's newest heavy platform, adding 60° vertical adjustment and ultra-close contact work to the existing 8 MPa envelope.

The post Orion AP3-P3 pairs with DJI’s M400 for high-altitude cleaning appeared first on Wisson Robotics.

]]> Three things, and none of them are cosmetic. The gimbal interface is new, the vertical adjustment range has been opened up, and the control profile has been retuned for the M400’s mass and rotor wash.

What changed

  • 60° vertical adjustable spraying, up from 40° on the M350 profile
  • Ultra-close operation — the squeegee can sit against the surface with the airframe a metre further out
  • Retuned recoil compensation for the heavier platform, holding station in stronger gusts

Why the M400 matters

Most cleaning jobs are not limited by the head. They are limited by how long the platform can stay up and how much wind it will take before the pilot calls it. A heavier airframe with more battery moves both limits, and on a tall facade that translates directly into fewer battery swaps per elevation.

From the field

Pre-release units ran on three sites over eight weeks: a curtain-wall tower, a coated-panel office block and a small wind farm. Across the three, crews reported a measurable drop in repositioning moves, which is where most of the non-productive time on a facade job goes.

Availability

The tethered cleaning head now flies on DJI’s newest heavy platform, adding 60° vertical adjustment and ultra-close contact work to the existing 8 MPa envelope.

The post Orion AP3-P3 pairs with DJI’s M400 for high-altitude cleaning appeared first on Wisson Robotics.

]]> Field note: fewer battery swaps on a tall facade https://wisson.sytech.site/fewer-battery-swaps/ Sat, 04 Jul 2026 01:00:00 +0000 https://wisson.sytech.site/fewer-battery-swaps/ Field note: fewer battery swaps on a tall facade

The post Field note: fewer battery swaps on a tall facade appeared first on Wisson Robotics.

]]> Three things, and none of them are cosmetic. The gimbal interface is new, the vertical adjustment range has been opened up, and the control profile has been retuned for the M400’s mass and rotor wash.

What changed

  • 60° vertical adjustable spraying, up from 40° on the M350 profile
  • Ultra-close operation — the squeegee can sit against the surface with the airframe a metre further out
  • Retuned recoil compensation for the heavier platform, holding station in stronger gusts

Why the M400 matters

Most cleaning jobs are not limited by the head. They are limited by how long the platform can stay up and how much wind it will take before the pilot calls it. A heavier airframe with more battery moves both limits, and on a tall facade that translates directly into fewer battery swaps per elevation.

From the field

Pre-release units ran on three sites over eight weeks: a curtain-wall tower, a coated-panel office block and a small wind farm. Across the three, crews reported a measurable drop in repositioning moves, which is where most of the non-productive time on a facade job goes.

Availability

The tethered cleaning head now flies on DJI’s newest heavy platform, adding 60° vertical adjustment and ultra-close contact work to the existing 8 MPa envelope.

The post Field note: fewer battery swaps on a tall facade appeared first on Wisson Robotics.

]]> A heavier platform, a quieter working day https://wisson.sytech.site/heavier-platform-working-day/ Fri, 22 May 2026 01:00:00 +0000 https://wisson.sytech.site/heavier-platform-working-day/ A heavier platform, a quieter working day

The post A heavier platform, a quieter working day appeared first on Wisson Robotics.

]]> Three things, and none of them are cosmetic. The gimbal interface is new, the vertical adjustment range has been opened up, and the control profile has been retuned for the M400’s mass and rotor wash.

What changed

  • 60° vertical adjustable spraying, up from 40° on the M350 profile
  • Ultra-close operation — the squeegee can sit against the surface with the airframe a metre further out
  • Retuned recoil compensation for the heavier platform, holding station in stronger gusts

Why the M400 matters

Most cleaning jobs are not limited by the head. They are limited by how long the platform can stay up and how much wind it will take before the pilot calls it. A heavier airframe with more battery moves both limits, and on a tall facade that translates directly into fewer battery swaps per elevation.

From the field

Pre-release units ran on three sites over eight weeks: a curtain-wall tower, a coated-panel office block and a small wind farm. Across the three, crews reported a measurable drop in repositioning moves, which is where most of the non-productive time on a facade job goes.

Availability

The tethered cleaning head now flies on DJI’s newest heavy platform, adding 60° vertical adjustment and ultra-close contact work to the existing 8 MPa envelope.

The post A heavier platform, a quieter working day appeared first on Wisson Robotics.

]]>